PRODUCT
SET-UP
CD SET-UP WIZARD
English
SET-UP WIZARD CD
The CD contains all of the instructions required to set-up DCS-1130
INSERT CD
Insert the CD into the CD drive of your computer. The set-up
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DCS-1130 yet)
SET-UP WIZARD
Select your language from the list of options and follow the
steps within the wizard to complete the set-up of DCS-1130
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To congure DCS-1130 using a static IP, connect your DCS-1130 directly to your computer's
ethernet port using the ethernet cable provided. Ensure that your computer is also set to a static IP
of address of type 192.168.0.x. Then connect the power cable on the DCS-1130. The DCS-1130
power light will display as solid red rst, then shortly turn to green.
Then simply open a browser window and enter the IP address in the browser address eld:
IP ADDRESS: http://192.168.0.20
USERNAME: admin
PASSWORD:
To Next Page
Loading...
Need help?
General
