button and locate the file. Once you have located the firmware file, click Upload to
commence the upgrade process.
Warning: Do not turn off your mydlink Baby Camera during this process. It is recommended
that this process is only carried out while the camera is connected directly to a power outlet
using the supplied power adapter.
8. How do I manually upgrade the firmware on my mydlink Baby Camera
using a computer with a Mac operating system?
Note: Before carrying out this procedure, please ensure that the computer you are using is
connected to the same wireless network as your mydlink Baby Camera.
Step 1: Open Safari, and click the Bonjour button which is located below the address bar.
Step 2: Select DCS-825L as the device you want to perform the firmware upgrade on.
To Next Page
Loading...
