D-Link DCS-850L Quick Install Guide

9. Should the app be running constantly on my device?
The app can run in the background, allowing you to hear your baby continuously, even
when the phone is locked. The smartphone or tablet can still be used normally while the
app is running. If you do not want to hear audio from the camera when the app is open,
you can turn o the Background audio on the Conguration menu. If you close the app,
the camera audio will be turned o.
10. How do I adjust the sensitivity of motion and audio detection?
From the Live View page, tap on the screen to reveal the icons, and tap the Conguration
icon ( ) to go to the Conguration menu. Tap the Events arrow to access the motion
and audio detection settings.
7. How can you power the camera?
The camera can be powered with the provided power adapter or you can use an external
USB battery for total portability. (USB battery is not included. Requires 5V/2A output.)
8. How do I access the camera remotely?
Set up a new mydlink account and/or register the camera with mydlink during the initial
setup. Once the process is complete, you can access the login screen for your mydlink
account from the Home page by sliding the Home icon switch to the right. Enter the
E-mail address and Password for your mydlink account and tap Log in.
You will be able to monitor your baby from anywhere, as long as your smartphone or
tablet is connected to the Internet (over Wi-Fi or over the cellular network).
Note: If you do not enable mydlink services, you will only be able to view the camera within
your home’s wireless coverage area.
9

D-Link DCS-850L Specifications

General

LED type	IR
Night mode	Yes
Sensor type	CMOS
Digital zoom	4 x
Video resolutions	320 x 240, 640 x 480 pixels
Fixed focal length	2.44 mm
Optical sensor size	1/4 \
Night vision distance	4.8 m
Pan range	-170 - 170 °
Maximum range	- m
Tilt angle range	-25 - 95 °
Number of lullabies	5
Image formats supported	JPG, MJPEG
Mobile operating systems supported	Android 4.1, Android 4.2, Android 4.3, Android 4.4, Android 5.0, Android 5.1, iOS 6.0, iOS 6.1, iOS 7.0, iOS 8.0, iOS 8.2, iOS 9.0
Night-light	-
Product color	Blue, Pink, White
Power source type	Battery, USB
Interface	Wi-Fi
Wi-Fi standards	Wi-Fi 4 (802.11n)
USB connector type	Micro-USB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (receiver)	20 - 80 %