Need help?Do you have a question about the D-Link DES-1005D and is the answer not in the manual?
General| Forwarding rate | 0.1488 Mpps |
|---|---|
| MAC address table | 2000 entries |
| Store-and-forward | Yes |
| Packet buffer memory | 0.046875 MB |
| Maximum data transfer rate | 0.2 Gbit/s |
| Supported data transfer rates | 10/20/100/200 Mb/s |
| 10G support | No |
| Networking standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technology | 100Base-TX, 10Base-T |
| Heat dissipation | 8.528 BTU/h |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power consumption (typical) | 2.5 W |
| Switch type | Unmanaged |
| Switch layer | - |
| Certification | RoHS, FCC, CE |
| Product color | Black |
| LED indicators | LAN, Power |
| Package depth | 105 mm |
| Package width | 65 mm |
| Package height | 98 mm |
| Package weight | 170 g |
| Cables included | AC |
| Packet transfer speed | 14880 - 148800 p/s |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Pallet width | 1200 mm |
| Pallet length | 1100 mm |
| Pallet height (air) | 1975 mm |
| Pallet gross weight (air) | 465250 g |
| Quantity per pallet (air) | 2400 pc(s) |
| Shipping (inner) case width | 350 mm |
| Shipping (inner) case height | 230 mm |
| Shipping (inner) case length | 515 mm |
| Shipping (inner) case weight | 9250 g |
| Shipping (inner) case net weight | 8500 g |
| Number of cartons per pallet (air) | 48 pc(s) |
| Quantity per shipping (inner) case | 50 pc(s) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 83.4 mm |
|---|---|
| Width | 125.3 mm |
| Height | 29.1 mm |
Details on warranty coverage for hardware defects, including periods and conditions.
Procedures for obtaining warranty service, including registration and claim submission.
Instructions for opening the package and verifying contents of the DSS-5+ switch.
Steps for preparing the environment and connecting the DSS-5+ switch for operation.
Guide for connecting a personal computer to the DSS-5+ switch using network cables.
Instructions for connecting hubs (10BASE-T and 100BASE-TX) to the DSS-5+ switch.
Procedures for linking the DSS-5+ switch to other switches or network devices.
To Next Page
