D-Link DES-108 Quick Install Guide

DES-108
ENGLISH
Quick Install Guide
8-Port 10/100 Desktop Switch
Thank you for purchasing the 8-Port Desktop Switch. Follow the easy steps in this guide
to properly set up your switch. Please verify that all the package contents listed below are
available.
Package Contents
If any of the above items are missing, please contact your reseller.
Network
Before You Begin
The setup of the Switch can be performed using the following steps:
• VisuallyinspecttheDCpowerjackandmakesurethatitisfullysecuredtothepoweradapter.
• DonotcovertheventilationholesonthesidesoftheSwitch,andmakesurethereisadequate
ventilation around it.
• DonotplaceheavyobjectsontheSwitch.
• PlacetheSwitchinacoolanddryenvironment.
Version 1.1(NA) | December 07, 2011 29072600DES1081
What This Product Does
Expand your home or oce network with the D-Link® 8-Port Desktop Switch. This Switch lets you network
up to eight devices at speeds up to 200Mbps (at full duplex) and is compact enough to be placed virtually
anywhere in your home or oce. Add a computer, printer, NAS storage device, or network camera and
expand the functionality of your network. You may also connect the Switch to hubs, switches, and routers
to expand your network.
DES-108 8-Port 10/100 Desktop Switch
Wall Mount Kit
Power Adapter
1
2
3
4
8
5
6 7
5V
-- -
3A
1 2 LAN 3 4 INTERNET USB
RESET
INTERNET
Step 1
Plug the supplied power adapter into the Switch and the other end into a power outlet, power strip, or
surgeprotector(recommended).VerifythePowerindicatorislitontheSwitch.
Step 2
ConnectoneendofanEthernetcableinthedeviceyouwanttoconnecttotheSwitchandtheother
endintooneoftheEthernetportsontheSwitch.ChecktheLinklights(LEDs)onboththeSwitchandthe
device to verify that there is a valid connection.
Note:Connectdevicesviaatwo-pairCategory3,4,5UTP/STPStraight-ThroughorCrossoverEthernet
cable.ACategory5(orhigher)Ethernetcablemustbeusedfor100Mbpsoperation.
Connecting the Switch
DES-108
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest user documentation and
softwareupdatesforD-Linkproducts.U.S.andCanadiancustomerscancontactD-LinkTechnicalSupport
through our website or by phone.
United States
Telephone: (877)453-5465
Internet: http://support.dlink.com
Canada
Telephone: (800)361-5265
Internet: http://support.dlink.ca
Copyright©2011Allrightsreserved.D-LinkandtheD-LinklogoareregisteredtrademarksofD-LinkCorporationoritssubsidiaries.Other
trademarksarethepropertyoftheirrespectiveowners.Productspecications,sizeandshapearesubjecttochangewithoutnotice,andactual
productappearancemaydierfromthatdepictedonthepackaging.Visitdlink.com(US)ordlink.ca(Canada)formoredetails.
Power Indicator
This green indicator light is on when the Switch is receiving power; otherwise, it is o.
Link/Act
This LED indicator light is green when the port is connected to a device. The green indicator blinks as data
is transmitted or received.
LEDs
• YoumaymounttheSwitchonawallwiththeincludedmountingkit.Twomounting slotsare
provided on the bottom of the Switch for this purpose.
• MagnetmountingisanoptionalmethodtomountingtheSwitchonawall,andisnotincluded
with the package contents.
Mounting
D-Link Green Technology
D-LinkGreenTechnologyimplementsspecialpower-savingfeaturesthatdetectlinkstatusandadjust
power usage accordingly. If there is no link on a port (when there is no connection or the device connected
is turned o) the port(s) will enter a “sleep mode” which will drastically reduce the amount of power used.
ThisproductisIEEE802.3azEnergyEciencyEthernetcompliant.TheIEEE802.3azEEEstandarddenes
mechanisms and protocols intended to reduce the energy consumption of network links during
periods of low utilization, by transitioning interfaces into a low-power state without interrupting the
networkconnection.Bothconnecteddevicesmustsupport802.3azEEEforpowersavingsupport.Ifthe
connecteddevicedoesnotsupport802.3azEEE,theswitchwilldefaulttoD-Link’sGreenTechnologyof
power saving.

D-Link DES-108 Specifications

General

MAC address table	1000 entries
Jumbo frames support	Yes
Packet buffer memory	0.768 MB
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology	100BASE-TX, 10BASE-T
Switch type	Unmanaged
Switch layer	-
Power connector	DC-in jack
Basic switching RJ-45 Ethernet ports quantity	8
Input current	1 A
Input voltage	5 V
Power consumption (typical)	2.1 W
Certification	RoHS, FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB
Product color	Black
LED indicators	Link, Power
Housing material	Metal
Mean time between failures (MTBF)	511323 h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Dimensions (WxDxH)	162 x 102 x 28 mm
Package depth	250 mm
Package width	208 mm
Package height	68 mm
Package weight	610 g
Pallet width	1220 mm
Pallet length	1020 mm
Pallet height (air)	2066 mm
Pallet gross weight (air)	357500 g
Quantity per pallet (air)	480 pc(s)
Shipping (inner) case width	260 mm
Shipping (inner) case height	443 mm
Shipping (inner) case length	370 mm
Shipping (inner) case weight	7000 g
Shipping (inner) case net weight	6100 g
Number of cartons per pallet (air)	48 pc(s)
Quantity per shipping (inner) case	10 pc(s)
Harmonized System (HS) code	85176990