DES-3526 Layer 2 Fast Ethernet Switch
DES-3526:4#disable telnet
Command: disable telnet
Success.
DES-3526:4#
enable web
Purpose
Used to enable the HTTP-based management software on the
Switch.
Syntax enable web <tcp_port_number 1-65535>
Description
This command is used to enable the Web-based management
software on the Switch. The user can specify the TCP port number
the Switch will use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535> − The TCP port number. TCP ports
are numbered between 1 and 65535. The “well-known” port for the
Web-based management software is 80.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To enable HTTP and configure port number:
DES-3526:4#enable web 80
Command: enable web 80
Success.
DES-3526:4#
disable web
Purpose
Used to disable the HTTP-based management software on the
Switch.
Syntax disable web
Description
This command disables the Web-based management software on
the Switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable HTTP:
20
To Next Page
Loading...
