The figure below shows the basic connection scheme for the
DFE-855.
A network device (a server, workstation, router, switch)
with a 100BASE-TX port is connected to the DFE-855's
RJ-45 jack through a twisted-pair cable; a device with a
100BASE-FX port is connected to the DFE-855's SC jack
through a fiber-optic cable; and the supplied AC power
adapter is connected to the DFE-855's DC power jack. The
figure shows the maximum possible distance between the
two devices: 2,100 meters. Note that the network ports on
both devices must be explicitly set to full-duplex mode to
allow the use of a cable of up to 2,000 meters long on the
100BASE-FX side.
's !
" !! ! "!#
$$ ! "%
& ! " $"!'(
To Next Page
Loading...
