28.23. Point-to-Point Protocol
PPP (Point-to-Point Protocol) is a link layer protocol used for transferring data along a Point to
Point link. It provides dynamic IP addressing, password support, error checking, and multiple
protocols transmission on the same link.
Family: Tunneling
Over: eth
Over: gre
Over: l2tp
Over: pppoe
Revision: 18
Risk level: 5
Tag: Tunnels
28.24. Point-to-Point Protocol Over Ethernet
PPP over Ethernet (PPPoE) provides the ability to connect a network of hosts over a simple
bridging access device to a remote Access Concentrator.
Family: Tunneling
Over: 8021q
Over: eth
Over: gre
Revision: 18
Risk level: 5
Tag: Tunnels
28.25. Point-to-Point Tunneling Protocol
Point-to-Point Tunneling Protocol allows the Point to Point Protocol (PPP) to be tunnelled
through an IP network.
Family: Tunneling
Over: tcp
Revision: 17
Risk level: 5
Tag: Tunnels
28.26. socks2http
Socks2http is a client software aiming to make a tunnel.
Family: Tunneling
Over: http
Over: http2
Over: https
Over: spdy
Over: tcp
Revision: 17
Risk level: 5
Chapter 28: Tunneling
327
To Next Page
Loading...
