D-Link DGS-1100-05 - Page 31

4 Configuration D-Link Smart Managed Switch User Manual
28
The Surveillance VLAN settings that can be configured are as follows:
Figure 4.36 – L2 Features > VLAN > Surveillance VLAN
The fields that can be configured for Surveillance VLAN are described below:
Item Description
Surveillance VLAN Global Settings
Surveillance VLAN
Specify to enable or disable the Surveillance VLAN function.
VLAN ID
Specify the VLAN ID to act as the Surveillance VLAN.
Priority
Specify the priority level. The levels of priority are High,
Medium and Low. The default priority is High.
User-defined MAC Settings
Component Type
Surveillance VLAN will automatically detect D-Link surveillance
devices
by default. There are another five surveillance
components that can
be configured for surveillance VLAN.
These five components are Video Management Server (VMS),
VMS Client, Video Encoder, Network Storage, and Other IP
brand’s Surveillance Devices. Usually, VMS and VMS Clients
are necessary components for an IP surveillance service.
Description
Enter a description for the component.
MAC-Address
Enter a MAC address of the component.
Table 4.18