Need help?Do you have a question about the D-Link EasySmart DGS-1100-08 and is the answer not in the manual?
General| Ports | 8 x 10/100/1000 Mbps |
|---|---|
| Switching Capacity | 16 Gbps |
| VLAN Support | Yes |
| QoS | Yes |
| Forwarding Rate | 11.9 Mpps |
| Management | Web-based GUI |
| Humidity | 10% to 90% non-condensing |
| Jumbo Frame | 9K bytes |
| Features | Loopback Detection |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -10 to 70 °C |
| MAC Address Table Size | 8K entries |
| Switch Type | Unmanaged |
Procedure for properly grounding the switch.
How to access and use the web interface, including supported browsers and connection steps.
Steps for logging into the switch's web interface.
Introduction to the Web-based Management interface and its layout.
Configuring IP, system name, and login timeout.
Monitoring and adjusting port configurations like speed and flow control.
Setting up password protection for the switch.
Configuring Layer 2 features like Port Trunking and IGMP Snooping.
Setting up 802.1Q, Management, and Port-Based VLANs.
Configuring Quality of Service for traffic prioritization.
Managing MAC address tables and security settings.
To Next Page
