Need help?Do you have a question about the D-Link DGS-F1026P-E and is the answer not in the manual?
General| Switching Capacity | 8.8 Gbps |
|---|---|
| Jumbo Frame | 9 KB |
| Surge Protection | 6KV |
| Extended Mode | Yes |
| MAC Address Table | 8K entries |
| Operating Temperature | 0 to 50 °C |
| VLAN | 802.1Q VLAN |
| Dimensions | 440 x 180 x 44 mm |
| Power Supply | 100 to 240 V AC, 50/60 Hz Internal Power Supply |
| Storage Temperature | -40°C to 70°C |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s |
Support IEEE802.3af/at PoE, with extended reach for ports 1-8 (250m).
SFP ports for network expansion, connecting to NVR, PC, or aggregation switches.
Connection point for the power cord to the mains power outlet.
Includes Extend, VLAN, QoS, and PoE auto-restart functionalities.
24 x 10/100/1000Mbps PoE RJ45 ports and 2 SFP uplink ports.
1000Mbps full duplex, 10/100/1000Mbps half duplex (downlink).
Supports IEEE 802.3i, 802.3u, 802.3x, 802.3ab, 802.3z, 802.3az, 802.3af, 802.3at.
Bandwidth: 52 Gbps (non-blocking). Network delay: max 10µs.
Details on Power, RESV, and LINK/ACT status lights.
Max power per port 30W, total budget 250W.
Size: 440x180x44mm, Weight: 3.0 kg.
Temperature: 0-40°C, Humidity: 10-90% (Non-condensing).
CE/ROHS/FCC compliance.
To Next Page
