Need help?Do you have a question about the D-Link DGS-108 and is the answer not in the manual?
General| MAC address table | 8000 entries |
|---|---|
| Jumbo frames support | Yes |
| Packet buffer memory | 0.128 MB |
| Maximum data transfer rate | 1 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| Dimensions (WxDxH) | 162 x 102 x 28 mm |
| Connectivity technology | Wired |
| 10G support | - |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| Switch type | Unmanaged |
| Switch layer | L2 |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Certification | FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB, RoHS |
| Product color | Black |
| Rack mounting | No |
| LED indicators | Link, Power, Y |
| Housing material | Metal |
| Input current | 1 A |
| Input voltage | 5 V |
| Power consumption (typical) | 4.5 W |
| Mean time between failures (MTBF) | 2053751 h |
| Heat dissipation | 9.548 BTU/h |
| Storage temperature (T-T) | 10 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Weight | 440 g |
|---|
Radio interference compliance warnings for FCC Class B and CE Mark requirements.
Essential precautions to prevent injury, electric shock, fire, and equipment damage.
Guidelines for safe rack mounting and protecting against electrostatic discharge (ESD).
Explains Fast Ethernet, Gigabit Ethernet, and network switching principles.
Details switch features, front-panel LEDs, and rear panel layout.
Covers package contents, site requirements, and ventilation for proper switch installation.
Instructions for mounting the switch and initial power-up procedures.
Guides for connecting to end nodes, hubs, switches, and servers using Ethernet cables.
Detailed general, physical, environmental, and performance specifications for the switch.
Definitions of technical terms and acronyms used throughout the manual.
Details the limited warranty, exclusions, and the procedure for submitting a warranty claim.
Information on online product registration, feedback, and global D-Link office contacts.
To Next Page
