D-Link DGS-108 - Appendix A: Technical Specifications; Hardware and Performance Specifications

D-Link DGS-108 Unmanaged Gigabit Ethernet Switch
11
Appendix A
Technical Specifications
General
Standards: IEEE 802.3ab 1000BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.1p QOS
Protocol: CSMA/CD
Data Transfer
Rate:
10Mbps (Half-duplex) Ethernet:
20Mbps (Full-duplex)
100Mbps (Half-duplex) Fast Ethernet:
200Mbps (Full-duplex)
Gigabit
Ethernet:
2000Mbps (Full-duplex)
Topology: Star
Network
Cables:
Ethernet: 2-pair UTP Cat. 3,4,5, Unshield
Twisted Pair (UTP )Cable
Fast Ethernet: 2-pair UTP Cat. 5,
Unshield Twisted Pair (UTP )Cable
Gigabit
Ethernet:
4-pair UTP Cat. 5,
Unshield Twisted Pair (UTP )Cable
Number of
Ports:
Eight 10/100/1000BASE-T Gigabit Ethernet ports
Physical and Environmental
DC Inputs:
AC-DC 7.5V/1.5A
This unit is to be used with a power supply listed below or equivalent:
AM-0751000D41 for USA
AM-0751000S41 for Australia
AM-0751000B for UK
AM-0751000M for China
AM-0751000V for Europe
Power
Consumption:
6.7 watts maximum
Operating
Temperature:
32°F ~ 104F ° (0 °C ~ 40℃)
Storage
Temperature:
14°F ~ 158°F (-10°C ~ 70°C)
Humidity: 5% ~ 95% RH, non-condensing
Dimensions: 7.76 in. x 4.49 in. x 0.34 in. (197 mm x 114 mm x 8.6 mm)
EMI FCC Class B, CE Mark Class B
Safety: CSA International