Need help?Do you have a question about the D-Link DGS-105 and is the answer not in the manual?
General| MAC address table | 2000 entries |
|---|---|
| Jumbo frames support | Yes |
| Packet buffer memory | 0.128 MB |
| Maximum data transfer rate | 1 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| 10G support | - |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| Dimensions (WxDxH) | 100 x 98 x 28 mm |
| Connectivity technology | Wired |
| Switch type | Unmanaged |
| Power connector | DC-in jack |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Certification | FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB, RoHS |
| Product color | Black |
| Rack mounting | No |
| LED indicators | Link, Power, Y |
| Housing material | Metal |
| Input current | 1 A |
| Input voltage | 5 V |
| Power consumption (typical) | 3.10 W |
| Mean time between failures (MTBF) | 1688338 h |
| Heat dissipation | 6.854 BTU/h |
| Storage temperature (T-T) | 10 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 85 mm |
|---|---|
| Width | 90.9 mm |
| Height | 22.4 mm |
| Weight | 190 g |
General precautions to reduce risk of injury, electrical shock, fire, and equipment damage.
Safety guidelines for installing and securing the switch in rack environments.
Provides guidelines for selecting an optimal installation site for the switch.
Step-by-step instructions for powering on the switch.
Explains how to connect the switch to end devices like PCs.
Details connecting the switch to hubs or other switches.
To Next Page
