Need help?Do you have a question about the D-Link DGS-1008D and is the answer not in the manual?
General| Switch type | - |
|---|---|
| Quality of Service (QoS) support | Yes |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| 10G support | No |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Jumbo frames | 9216 |
| MAC address table | 4000 entries |
| Certification | CE, FCC, cUL, CB, LVD |
| Product color | White |
| Housing material | Plastic |
| Mean time between failures (MTBF) | 522270 h |
| Input voltage | 5 V |
| Output current | 1 A |
| Power consumption (max) | 5.4 W |
| Power consumption (typical) | 3.48 W |
| Heat dissipation | 19.24 BTU/h |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 84 mm |
|---|---|
| Width | 144 mm |
| Height | 34 mm |
| Weight | 330 g |
Essential precautions to prevent electrical shock, fire, and equipment damage during use.
Identifies front panel components and explains the function of each LED indicator.
Describes the rear panel layout, including the DC power jack and Ethernet ports.
Guides on connecting PCs, routers, network backbones, or servers to the switch.
Explains how to connect the switch to hubs or other switches using various cable types.
Explains the warranty periods and terms for hardware and software components.
To Next Page
