Need help?Do you have a question about the D-Link DGS-1024D and is the answer not in the manual?
General| Basic switching RJ-45 Ethernet ports quantity | 24 |
|---|---|
| MAC address table | 8000 entries |
| Store-and-forward | Yes |
| Packet buffer memory | 0.5 MB |
| Maximum data transfer rate | 1 Gbit/s |
| Dimensions (WxDxH) | 280 x 180 x 44 mm |
| Power consumption (typical) | 26.7 W |
| Storage temperature (T-T) | -10 - 55 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Switch type | Unmanaged |
| Package depth | 391 mm |
| Package width | 262 mm |
| Package height | 102 mm |
| Package weight | 2428 g |
| Pallet width | 1200 mm |
| Pallet length | 1100 mm |
| Pallet height (air) | 1859 mm |
| Pallet gross weight (air) | 435780 g |
| Quantity per pallet (air) | 160 pc(s) |
| Shipping (inner) case width | 284 mm |
| Shipping (inner) case height | 431 mm |
| Shipping (inner) case length | 543 mm |
| Shipping (inner) case weight | 13040 g |
| Shipping (inner) case net weight | 8530 g |
| Number of cartons per pallet (air) | 32 pc(s) |
| Quantity per shipping (inner) case | 5 pc(s) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 280 mm |
| Height | 44 mm |
| Weight | 1300 g |
Lists all items included in the switch package for verification.
Details environmental and placement requirements for the switch.
Guides on placing the switch on a desk or shelf using provided rubber feet.
Explains how to mount the switch into a standard equipment rack using mounting brackets.
Details the power source requirements (100-240 VAC) for the switch.
Describes Ethernet port speeds, duplex modes, and auto MDI/MDIX features.
Explains the meaning of LED colors and states for monitoring switch and network status.
Details the functions controlled by DIP switches for features like EEE, Flow Control, and Port Isolation.
Provides specific information on how port isolation operates for DGS-1016D and DGS-1024D models.
Explains LED indicators for detecting cable faults like open circuits or shorts.
To Next Page
