Need help?Do you have a question about the D-Link DGS-1024A and is the answer not in the manual?
General| Switching Capacity | 48 Gbps |
|---|---|
| MAC Address Table | 8K |
| Dimensions | 440 x 180 x 44 mm |
| Forwarding Rate | 35.7 Mpps |
| Switch Type | Unmanaged |
| Packet Buffer Memory | 512 KB |
| Ports | 24 x 10/100/1000 Mbps |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Jumbo Frame Support | 9, 216 Bytes |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Highlights key features like unmanaged operation, speed support, auto MDI/MDIX, and Green Technology for the DGS-1016A/DGS-1024A.
Focuses on IEEE 802.3az Energy-Efficient Ethernet and power saving by link status and cable length for the switches.
Explains how to connect end nodes, such as PCs or routers, to any port of the switch using twisted-pair cables.
Details how to connect hubs or other switches using straight or crossover Ethernet cables, specifying cable categories.
Describes using Gigabit Ethernet ports for uplinking to a network backbone or connecting to a network server.
Lists general technical specifications including standards, protocol, data transfer rates, topology, network cables, and number of ports.
To Next Page
