Need help?Do you have a question about the D-Link DGS-1005P and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Switch layer | L2 |
| Quality of Service (QoS) support | Yes |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| 10G support | No |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| MAC address table | 2000 entries |
| Total Power over Ethernet (PoE) budget | 60 W |
| Power over Ethernet (PoE) ports quantity | 4 |
| Power over Ethernet (PoE) power per port | 30 W |
| Stackable | - |
| Certification | CE, BSMI, FCC , VCCI, RCM, cUL, CB, LVD, BSMI |
| Product color | Black |
| LED indicators | Activity, Link, PoE, Power, Speed, Status |
| Housing material | Metal |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Packet filtering | 7.44 Mpps |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 98 mm |
|---|---|
| Width | 100 mm |
| Height | 28 mm |
| Weight | 260 g |
Steps to prepare the switch for installation.
Instructions on how to mount the switch.
How to connect the power adapter.
Information about PoE ports.
Details on Gigabit Ethernet ports.
Common issues related to setup and configuration.
To Next Page
