Need help?Do you have a question about the D-Link DGS-1016D and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Quality of Service (QoS) support | Yes |
| Power connector | AC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Form factor | 1U |
| Certification | cUL/UL CE LVD CCC CB BSMI |
| Product color | Black, Silver |
| LED indicators | Activity, Link, Power, Speed |
| Housing material | Metal |
| Electromagnetic compatibility | ICES-003 Class A, FCC Class A, RCM Class A, BSMI Class A, CE Class A, VCCI A, CCC, KCC |
| 10G support | No |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
| Input current | 0.2 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 10.07 W |
| Jumbo frames | 10000 |
| Forwarding rate | 23.81 Mpps |
| Number of queues | 8 |
| MAC address table | 8000 entries |
| Packet buffer memory | 0.5 MB |
| Packet forwarding rate (1 Gbps) | 14880 pps |
| Packet forwarding rate (10 Mbps) | 1488000 pps |
| Packet forwarding rate (100 Mbps) | 148800 pps |
| Heat dissipation | 34.3 BTU/h |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Noise level | 0 dB |
| Mean time between failures (MTBF) | 1882372 h |
Weight and Dimensions| Depth | 125 mm |
|---|---|
| Width | 280 mm |
| Height | 44 mm |
| Weight | 1020 g |
Details the DGS-1016D/1024D switch capabilities and port configuration.
Lists all items included in the switch's shipping carton for setup.
Provides guidelines for selecting an optimal installation site for the switch.
Covers rack mounting and attaching rubber feet for proper switch placement.
Instructions for connecting PCs, routers, and other end devices to the switch.
Guidance on linking the switch to other network hubs or switches.
Essential safety guidelines to prevent injury and equipment damage during use.
To Next Page
