D-Link DGS-1016D - Provide for Adequate Ventilation

D-Link DGS-1016D/DGS-1024D Unmanaged Gigabit Ethernet Switch
13
Figure 2-2. Attaching the Rubber Feet
Provide for Adequate Ventilation
CAUTION:
Do not place any device on top of
Switch, or place the Switch on top of any device
or object that will block the free flow of air
through the ventilation slots on the sides, top, and
bottom of the Switch’s case. In addition, care
should be taken not to locate the Switch next to,
on top of, or underneath any device that
generates a significant amount of heat. For the
Switch to perform at its optimal level, the Switch
must have adequate ventilation to prevent the
Switch from overheating and becoming damaged.