To Next PageTo Next Page
Need help?Do you have a question about the D-Link DGS-1016D and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Quality of Service (QoS) support | Yes |
| Power connector | AC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Form factor | 1U |
| Certification | cUL/UL CE LVD CCC CB BSMI |
| Product color | Black, Silver |
| LED indicators | Activity, Link, Power, Speed |
| Housing material | Metal |
| Electromagnetic compatibility | ICES-003 Class A, FCC Class A, RCM Class A, BSMI Class A, CE Class A, VCCI A, CCC, KCC |
| 10G support | No |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
| Input current | 0.2 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 10.07 W |
| Jumbo frames | 10000 |
| Forwarding rate | 23.81 Mpps |
| Number of queues | 8 |
| MAC address table | 8000 entries |
| Packet buffer memory | 0.5 MB |
| Packet forwarding rate (1 Gbps) | 14880 pps |
| Packet forwarding rate (10 Mbps) | 1488000 pps |
| Packet forwarding rate (100 Mbps) | 148800 pps |
| Heat dissipation | 34.3 BTU/h |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Noise level | 0 dB |
| Mean time between failures (MTBF) | 1882372 h |
Weight and Dimensions| Depth | 125 mm |
|---|---|
| Width | 280 mm |
| Height | 44 mm |
| Weight | 1020 g |
