D-Link DGS-108 - Connecting to Network Backbone or Server

D-Link DGS-108 Unmanaged Gigabit Ethernet Switch
10
• A 1000BASE-T switch can be connected to the Switch via a twisted -pair Category 5e or better
UTP/STP cable.
Figure 3-2. Switch connected to a port on a hub or switch using either a straight or crossover cable–
any standard Ethernet cable is fine
Connecting To Network Backbone or Server
Any of the eight Gigabit Ethernet ports are ideal for uplinking to a network backbone or network server.
Figure 3-3. Connection to a Server