D-Link DGS-F1026P-E - Product Specifications; Switch Modes; Network Ports; Transfer Rate

1.7 Product Specifications
Switch Modes
Extend: Supports long reach PoE delivery, up to 250m.
(Cat 5 or better cabling is recommended)
VLAN: Isolates ports from each other. Adds security and improves network
performance by constraining broadcast traffic.
QOS: Introduces application prioritisation. Traffic with higher priority (e.g. Voice
over IP) will be forwarded ahead of the queue.
PoE: Automatically restarts a remote device by disabling and re-enabling PoE on
the port if it detects the remote device has locked up (no incoming traffic).
Network Port
24 x 10/100Mbps/1000Mbps PoE RJ45 ports (Port 1 – Port 24)
2 SFP uplink
Transfer Rate
1000Mbps full Duplex, 10 or 100 or 1000Mbps Half Duplex (Downlink)
Network Protocol
standards
IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3az, IEEE
802.3af, IEEE 802.3at
Performance
Bandwidth: 52 Gbps (non-blocking)
Network delay（1000 to 100Mbps): maximum 10μs (using 64-byte packet)
Frame filtering and transmission rate:
10M port maximum 14,800pps
100M port maximum 148,800pps
1000M port maximum 148,8800pps
LED indicator
Power
RESV
LINK/ACT
PoE pins
1/2(+), 3/6(-)
Power
Max power for single port 30 W
Total Power Budget: 250 W
Dimensions
Size（L x W x H): 440mm x 180mm x 44mm
Weight: 3.0 kg
Environment
Operating Temperature: 0° - 40°C
Operating Humidity: 10% - 90%, Non-condensing
Safety
CE/ROHS/FCC