D-Link DGS-1100-16 - Page 22

D-Link DGS-1100 Series Switch User Manual
Step 3 – SNMP Settings
In this window, the user can enable or disable the SNMP function.
Figure 4-6 SNMP window
The fields that can be configured are described below:
Parameter Description
SNMP Select the Enabled option to enable the SNMP function.
Select the Disabled option to disable the SNMP function.
Tick the Ignore the wizard next time option to skip the Smart Wizard on the next login.
Click the Exit button to discard the changes made, exit the Smart Wizard, and continue to the Web
UI.
Click the Apply & Save button to accept the changes made, and then continue to the Web UI.
1
1
6
6