D-Link DHP-310AV - Page 13

13D-Link DHP-310 AV User Manual
Section 3 - Conguration
Shows the name of the devices that have been discovered.
The device’s name is initially set by the utility itself.
Shows if the device is local or remote
Shows the network connection quality of the connected
device.
• Three squares - Suitable for HD video stream connection.
• Two squares - Suitable for SD video stream connection.
• One square - Suitable for data and Internet activity
connection.
Shows the link rate of the connected to the PowerLine device.
Shows the MAC address of the connected PowerLine device.
Shows the rmware version of the connected PowerLine
device.
Click Factory Reset to reset the device back to factory default
settings.
Click Firmware Upgrade to improve the functionality of your
powerLine device.
After you have downloaded the new rmware, click Browse
to locate the rmware update on your hard drive. Click OK
to proceed to rmware upgrade.
Device Name:
Location:
Quality:
Link Rate:
MAC Address:
Firmware
Version:
Factory Reset:
Firmware
Upgrade: