D-Link DHP-601AV - Connection Ports

FAQs
If I do not see LEDs light up?
If the Power LED is o, make sure the PowerLine devices are plugged
into outlets with power. Also make sure the PowerLine devices are not
plugged into an extension cord, power strip, or surge protector.
If the PowerLine LED is o, the devices are unable to nd each other.
You can plug in all the PowerLine adapters within the same room in
order to determine whether your home’s electrical outlets are suitable.
The adapters’ PowerLine LED will light up when a connection is
established.
If I’m having problems with conguration?
If you are having problems conguring the network with two or more
PowerLine adapters, make sure you reset all the devices and start the
conguration process again.
If you get an error message during conguration, make sure you have
not inadvertently unplugged the PowerLine adapter.
7