DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 18
45. You can then ping an
Internal LAN IP address on
the DI-804HV side (i.e.
192.168.0.4 in this
example) in the DOS
prompt. It will then start
Negotiating IP security and
eventually you will get a
reply.
46. Please note that if you
make any changes to the
IPsec policy, you will need
to Restart the ‘IPsec Policy
Agent’ in order for the
changes to take effect.
You can do this by going
into StartÆ SettingsÆ
Control PanelÆ
Administrative ToolsÆ
Services.
47. In Windows 2000
Professional, you can
monitor the IPsec tunnels
that you have by running
‘IPSECMON.EXE’ in StartÆ
Run. In Windows XP, you
can add a snap-in in the
MMC called ‘IP Security
Monitor’.
To Next Page
Loading...
