DIR-300A Quick Installation Guide
Wi-Fi Client
This configuration step is available for the WISP Repeater, Repeater, and
Client modes.
1. On the Wi-Fi client page, in the Wireless Networks section, select the
network to which you want to connect. When you select a network, the
Network name (SSID) and BSSID fields are filled in automatically.
If you cannot find the needed network in the list, click the Update list button.
2. If a password is needed to connect to the selected network, fill in the
relevant field.
If you connect to a hidden network, from the Connecting to network list
select the Connect to hidden network value. Enter the network name to
the Network name (SSID) field. Then select a needed value from the
Network authentication list and then, if needed, enter the password in the
relevant field.
3. Click the NEXT button.
20
To Next Page
Loading...
