DIR-300A Quick Installation Guide
Conguring Wireless Network
This configuration step is available for the Router, Access point, WISP
Repeater, and Repeater modes.
1. On the Wireless Network page, in the Network name field, specify
your own name for the wireless network or leave the value suggested by
the router.
2. In the Password field, specify your own password for access to the
wireless network or leave the value suggested by the router (WPS PIN of
the device, see the barcode label).
3. You can restore the parameters of the wireless network specified before
resetting to factory defaults. To do this, click the RESTORE button.
25
To Next Page
Loading...
