DIR-300A Quick Installation Guide
Default Settings
IP address of wireless router
192.168.0.1
Username (login)
admin
Password
admin
Name of wireless network (SSID)
DIR-300A
Network key (PSK password)
see WPS PIN on the
barcode label on the
bottom panel of the
device
!
Router DIR-300A with default settings cannot connect to the Internet.
To get started, please set your own password for access to the web-
based interface and change the WLAN name (SSID); then, if needed,
configure other settings recommended by your ISP.
3
To Next Page
Loading...
