33D-Link DIR-456 User Manual
Section 3 - Configuration
Virtual Server
The device can be configured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address
of the router.
You may select Always On or
choose the number of a schedule
rule that you have defined.
VIRTUAL SERVERS LIST
Identifies the virtual server.
Enter the last digits of the IP
address of the computer on your
local network that you want to allow
the incoming service. In the next
box, enter the port number that you
would like to open.
Select this box to enable the rule.
Specify the schedule rule
number.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
Use schedule rule:
ID:
Server IP: Port:
Enable:
Schedule Rule #:
To Next Page
Loading...
