DIR-506L
6
ENGLISH
Connection Setup with QRS Mobile
If you wish to use Wireless Router Mode, you can configure your
DIR-506L with the handy QRS Mobile app for iOS and Android mobile
devices.
Use a barcode scanner app such as Bakodo or RedLaser on your iOS
or Android device to scan the corresponding code for your device
below. If you do not have a scanning app, just search for QRS Mobile
in the App Store or Google Play. Please make sure you have a working
Internet connection before downloading the app.
After downloading the app, connect to the DIR-506L wirelessly using
the following information:
• Default WiFi SSID: dlink_DIR-506L
• Default Password: (leave this blank)
You can now open the QRS Mobile app and follow the on-screen
instructions to configure your DIR-506L.
To Next Page
Loading...
