D-Link DIR-605 - Port Forwarding

34D-Link DIR-605 User Manual
Section 3 - Conguration
Port Forwarding
This will allow you to open a single port or a range of ports.
Check the box to enabled the rule.
Enter a name for the rule.
Enter the IP address of the computer on
your local network that you want to allow the
incoming service to.
Enter the port or ports that you want to open. If
you want to open one port, enter the same port
in both boxes.
Select TCP, UDP, or Any
Rule:
Name:
IP Address:
Start Port/
End Port:
Trafc Type: