-6-
FAQ : How to Manually Configure Wireless Settings for DIR-605L
Technical Support Setup Procedure
How to Manually Configure Wireless Settings for DIR-605L
Please note use only hard-wired network connections, to do the setting.
** Disable firewall in your PC to avoid login problem**
Step 1: Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using
Network cable.
Step 2: Launch your IE (Internet explorer) and key in 192.168.0.1 in the address column
and press enter. You may also access via http://dlinkrouter
Step 3: Enter your Username: admin and leave the password blank then Click on Log In.
Step 4: Click Manual Setup button at the bottom.
To Next Page
Loading...
