Need help?Do you have a question about the D-Link DIR-615/T and is the answer not in the manual?
Interface| WAN Port | 1 x 10/100 Base TX RJ-45 |
|---|---|
| LAN Ports | 4 x 10/100 Base TX RJ-45 |
Wireless Specifications| Wireless Signal Rates | Up to 300 Mbps |
|---|---|
| Frequency Range | 2.4 GHz to 2.483 GHz |
Operating Environment| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
|---|---|
| Storage Temperature | -20°C to 65°C (-4°F to 149°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
Weight and Dimensions| Dimensions | 148 x 113 x 32 mm (5.8 x 4.4 x 1.3 inches) |
|---|---|
| Weight | 214 grams (.047 lbs) |
Details on the manual's revision history, including date and description.
Lists trademarks of D-Link and other companies mentioned in the manual.
Lists the items included in the router package.
Describes the router's physical ports for network and power connections.
Explains the status indicators (LEDs) on the router and their meanings.
Provides essential preparatory steps and considerations before starting the router installation.
Offers advice on optimizing wireless signal strength and range.
Step-by-step instructions for connecting the router to a modem.
Instructions for initiating the router setup using the provided CD.
Explains how to access and log into the router's web-based configuration interface.
Details how to use the wizard to quickly configure the router's internet connection.
Instructions for setting up the router's internet connection type.
Configuration options for various internet connection types like PPPoE and PPTP.
Instructions for configuring the router for L2TP internet connections.
Steps for manually configuring a Dynamic (Cable) internet connection.
Instructions for manually configuring a Static IP internet connection.
Details on configuring PPPoE (Point to Point Protocol over Ethernet) for DSL connections.
Steps for configuring the router with a PPTP (Point-to-Point Tunneling Protocol) connection.
Instructions for configuring the router with an L2TP (Layer 2 Tunneling Protocol) connection.
Details on configuring the DS-Lite connection type for IPv6.
Options for configuring wireless network settings, including setup wizards.
Detailed guide for manually configuring wireless network parameters.
Configuration options for securing the wireless network using WPA/WPA2.
Options for configuring the router's IP address, subnet mask, and DNS relay.
Configuration options for the router's DHCP server, including IP address range.
How to assign a static IP address to a device using DHCP reservation.
Explains how to set up the router as a virtual server for remote access.
Details on creating and managing Virtual Server rules.
Instructions for creating rules to manage applications that require specific port configurations.
How to open specific ports for incoming traffic to applications.
Configuring Quality of Service (QoS) to prioritize network traffic.
Using MAC addresses to control network access for devices.
Setting up parental controls and access policies for network usage.
Steps for creating and configuring access control policies using the wizard.
Steps for defining filtering methods and port rules in the Access Control Wizard.
Setting up rules to allow or deny access to specific websites.
Configuring inbound data filtering rules based on IP address ranges.
Configuring firewall features like SPI, Anti-Spoof, and DMZ Host.
Fine-tuning advanced wireless network parameters.
Instructions for adding wireless devices using WPS.
Configuration options for wired network settings like UPnP and WAN ping.
Setting up IPv6 using automatic detection for connection type.
Setting up IPv6 using autoconfiguration methods like DHCPv6.
Setting up IPv6 with manually assigned static IP addresses.
Configuring IPv6 using DHCP autoconfiguration settings.
Setting up IPv6 using PPPoE for internet connections.
Configuring IPv6 using an IPv6 in IPv4 tunnel.
Setting up IPv6 to IPv4 tunneling using the 6to4 protocol.
Configuring IPv6 using the 6rd transition mechanism.
Configuring IPv6 for local network connectivity only.
Troubleshooting steps for accessing the router's web interface.
Procedure for resetting the router if the password is forgotten.
Troubleshooting connectivity issues with specific sites or email by adjusting MTU.
Steps to verify your computer's MAC and IP addresses.
Instructions for manually assigning a static IP address to a network adapter.
To Next Page