77D-Link DIR-615 User Manual
Section 4 - Security
From the Setup > Wireless Settings screen, click Add Wireless Device with
WPS.
Add Wireless Device with WPS Wizard
PIN: Select this option to use the PIN method. In order to use this method you
must know the wireless client’s 8 digit PIN and click Connect.
PBC: Select this option to use PBC (Push Button) method to add a wireless
client. Click Connect. Press the WPS button on your new device within 120
seconds to establish a connection. Note that this button may be a physical
button on the device’s exterior, or a software button within the device’s user
interface.
Select to add a wireless client using WPS (Wi-Fi Protected Setup). The
wizard will take you through the steps to add your devices using WPS.
If you select , a settings summary screen will appear. Use the
information displayed on this screen to connect your wireless client. Please
refer to your device’s user documentation if you require further information
on how to connect to a wireless network manually.
To Next Page
Loading...
