D-Link DIR-615/T - Ipv6 in Ipv4 Tunnel

49D-Link DIR-615 User Manual
Section 3 - Conguration
IPv6 in IPv4 Tunnel
Select IPv6 in IPv4 Tunnel from the drop-down menu.
Enter the IPv4 remote address you will use.
Enter the IPv6 remote address you will use.
Enter the IPv4 local address you will use.
Enter the IPv6 local address you will use.
Enter the subnet prefix length given to you by your tunnel broker
Select either Obtain IPv6 DNS Servers Automatically or Use the
following IPv6 DNS Servers.
Enter the primary and secondary DNS server addresses.
Check this box to enable DHCP prefix delegation for each LAN.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Check to enable the automatic IPv6 address assignment feature.
My IPv6
Connection Is:
Remote IPv4
Address:
Remote IPv6
Address:
Local IPv4
Address:
Local IPv6
Address:
Subnet Prefix
Length:
IPv6 DNS
Settings:
Primary/
Secondary DNS
Address:
Enable
DHCP-D:
LAN IPv6
Address:
LAN IPv6 Link-
Local Address:
Enable
Automatic IPv6
Address
Assignment: