D-Link DIR-615/T - Configuration; IPv6 Connection Types: DHCP Autoconfiguration

46D-Link DIR-615 User Manual
Section 3 - Conguration
DHCP Autoconfiguration
Select Autoconfiguration (SLAAC/DHCPv6) from the drop-down
menu.
Select either Obtain IPv6 DNS Servers Automatically or Use the
following IPv6 DNS Servers.
If you did not choose to obtain DNS servers automatically, enter the
primary and secondary DNS server addresses.
Check this box to enable DHCP-PD services.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Check to enable the automatic IPv6 address assignment feature.
Check this box to automatically enable DHCP-PD services.
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
DHCPv6.
Enter the IPv6 address lifetime (in minutes).
My IPv6
Connection Is:
IPv6 DNS Settings:
Primary/
Secondary DNS
Address:
Enable DHCP-PD:
LAN IPv6 Address:
LAN Link-Local
Address:
Enable Automatic
IPv6 Address
Assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconfiguration
Type:
Router
Advertisement
Lifetime: