D-Link DIR-615/T - Time Settings

56D-Link DIR-615 User Manual
Section 3 - Conguration
Time Settings
Select the time zone from the drop-down menu.
To select daylight saving time manually, select enabled or disabled, and
enter a start date and an end date for daylight saving time.
Network Time Protocol (NTP) synchronizes computer clock times in a
network of computers. Check this box to use a NTP server. This will only
connect to a server on the Internet, not a local server.
Enter the NTP server or select one from the drop-down menu.
To manually input the time, enter the values in these fields for the year,
month, day, hour, minute, and second and then click Set Time. You can
also click Sync Your Computer’s Time Settings.
Time Zone:
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Manual:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the time server. Daylight saving can also be configured to
automatically adjust the time when needed.