D-Link DIR-615/T User Manual

40D-Link DIR-615 User Manual
Section 3 - Conguration
Set the transmit power of the antennas.
Enabling this feature prevents wireless clients from communicating
with each other over the wireless network. Clients will still be able
to communicate with the router and access the Internet, however
communications with other connected wireless clients will be blocked.
WMM is QoS for your wireless network. This can help to improve the
quality of video and voice applications for your wireless clients.
Enable this feature to force the use of the 40 MHz band even in heavily
congested areas. Enabling this feature may reduce transmission speeds
when there are a number of other wireless N devices operating within
the same vicinity. When disabled, the DIR-615 will drop back to the
slower 20 MHz when heavy congestion is detected on the 40 MHz band.
Transmit
Power:
WLAN
Partition:
WMM Enable:
HT 40/20
Coexistence:
Advanced Wireless Settings
This section allows you to adjust the advanced settings of your wireless network. It is not recommended that you make changes
in this section unless you are familiar with these settings, or you have been instructed to do so.

D-Link DIR-615/T Specifications

Interface

WAN Port	1 x 10/100 Base TX RJ-45
LAN Ports	4 x 10/100 Base TX RJ-45

Wireless Specifications

Wireless Signal Rates	Up to 300 Mbps
Frequency Range	2.4 GHz to 2.483 GHz

Operating Environment

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 65°C (-4°F to 149°F)
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)

Weight and Dimensions

Dimensions	148 x 113 x 32 mm (5.8 x 4.4 x 1.3 inches)
Weight	214 grams (.047 lbs)