D-Link DIR-615/T User Manual

27D-Link DIR-615 User Manual
Section 3 - Conguration
DHCP Reservation
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router
will assign the IP address only to that computer or device.
Note: This IP address must be within the DHCP IP address range.
Check this box to enable the reservation.
Enter the computer name or select from the drop-down menu and
click <<.
Enter the IP address you want to assign to the computer or device. This
IP address must be within the DHCP IP address range.
Enter the MAC address of the computer or device.
Click this button to copy the MAC address of the computer you are
currently using into the MAC address field.
Click Save to save your entry. You must click Save Settings at the top
to activate your reservations.
This section displays the number of dynamic DHCP clients currently
connected, and lists details of each client in the table below,
Click Revoke to cancel the lease for a specific LAN device and free an
entry in the lease table. Do this only if the device no longer needs the
leased IP address, because, for example, it has been removed from the
network.
Enable:
Computer
Name:
IP Address:
MAC Address:
Copy Your PC’s
MAC Address:
Save:
Number of
Dynamic DHCP
Clients:
Revoke:
Note: The revoke option will not disconnect a PC with a current network session from the network; you would need to use MAC
address filter to do that. Revoke will only free up a DHCP address for the very next requester. If the previous owner is still available,
those two devices may both receive an IP address conflict error, or the second device may still not receive an IP address; in that case,
you may still need to extend the DHCP IP address range to address the issue, which is located in the DHCP server section.
The reserve option converts this dynamic IP allocation into a DHCP reservation and adds the corresponding entry to the DHCP
reservations list.

D-Link DIR-615/T Specifications

Interface

WAN Port	1 x 10/100 Base TX RJ-45
LAN Ports	4 x 10/100 Base TX RJ-45

Wireless Specifications

Wireless Signal Rates	Up to 300 Mbps
Frequency Range	2.4 GHz to 2.483 GHz

Operating Environment

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 65°C (-4°F to 149°F)
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)

Weight and Dimensions

Dimensions	148 x 113 x 32 mm (5.8 x 4.4 x 1.3 inches)
Weight	214 grams (.047 lbs)