38D-Link DIR-655 User Manual
Section 3 - Conguration
Enter the IP address of packets that will take this route.
Enter the netmask of the route, please note that the octets 
must match your destination IP address.
Enter your next hop gateway to be taken if  this  route is 
used.
The route metric is a value from 1 to 16 that indicates the 
cost of using this route. A value 1 is the lowest cost and 15 
is the highest cost. 
Select the interface that the IP packet must use to transit 
out of the router when this route is used. 
Destination IP:
Netmask:
Gateway:
Metric:
Interface:
Routing
The Routing option is an advanced method of customizing specic routes of data through your network.