59D-Link DIR-655 User Manual
Section 3 - Conguration
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that 
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has 
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and 
user account passwords.
Enter a new password for the Administrator Login Name. The administrator can make 
changes to the settings.
Enter the new password for the User login. If you login as the User, you cannot change 
the settings (you can only view them).
Enter a name for the DIR-655 router.
Enables a challenge-response test to require users to type letters or numbers from a 
distorted image displayed on the screen to prevent online hackers and unauthorized 
users from gaining access to your router’s network settings.
Check to enable HTTPS to connect to the router securely.
Remote management allows the DIR-655 to be congured from the Internet by 
a web browser.  A username and password is still  required to access the Web-
Management interface. In  general, only a member of your network can browse 
the built-in web pages to perform Administrator tasks. This feature enables you to 
perform Administrator tasks from the remote (Internet) host.
The port number used to access the DIR-655.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-655 
and 8080 is the port used for the Web Management interface. If you have enabled 
HTTPS Server and checked Use HTTPS, you must enter https:// as part of the URL 
to access the router remotely.
This section will list any rules that are created. You may click the Edit icon to change 
the settings or enable/disable the rule, or click the Delete icon to remove the rule.
Admin Password:
User Password:
Gateway Name:
Enable Graphical 
Authentication:
Enable HTTPS Server:
Enable Remote 
Management:
Remote Admin Inbound 
Filter:
Details: