DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
2.4 GHz / 5 GHz
Maximum time of
storing data on
adjacent clients
The maximum time period (in seconds) during which the access
point (router) stores data on the signal strength of the client located
on its coverage area.
Minimum level of
connection quality
The threshold value of the signal strength upon which the access
point (router) starts scanning other devices.
Dead zone
This parameter is used for calculation of the signal strength upon
which the smart adjustment function goes off. If the signal strength
provided by the device is less than the sum of the Minimum level
of connection quality field value and the Dead zone field
value, then the client disconnects from the access point (router) and
connects to another device. You can specify the values from -50% to
+50%.
Multicast Settings
Multicast TTL
Specify the TTL (Time to live) parameter value. The recommended
value is 4.
Multicast group
address
Specify the address of the multicast group (from the subnet
239.255.0.0/16).
After specifying the needed parameters, click the APPLY button.
To disable the function of smart adjustment of Wi-Fi clients, move the Enable switch to the left.
Page 142 of 221
To Next Page
Loading...
