DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Ping
On the System / Ping page, you can check availability of a host from the local or global network
via the Ping utility.
The Ping utility sends echo requests to a specified host and receives echo replies.
Figure 162. The System / Ping page.
To check availability of a host, enter the IP address or name of this host in the Host field and select
a number of requests that will be sent in order to check its availability from the Count of packets
drop-down list. If availability check should be performed with IPv6, move the IPv6 switch to the
right. Click the START button. After a while, the results will be displayed on the page.
To remove the check result from the page, click the CLEAR button.
Page 208 of 221
To Next Page
Loading...
