3
Hardware Overview
1 Power LED A solid green light indicates a proper connection to the power supply.
2 2.4G LED
A solid green light indicates the 2.4GHz wireless function is working
properly. This light will blink during data transmission.
3 5G LED
A solid green light indicates the 5GHz wireless function is working properly.
This light will blink during data transmission.
4 Internet LED A solid green light indicates a connection to the Internet port.
5 WPS LED
A solid green light indicates a successful connection using WPS. The light
will blink during the WPS process.
6 Reset Button
Press and hold the reset button with a paper clip for 10 seconds to reset the
router to the factory default settings.
7 Power Button Press to power the router on and o.
8 Power Port Connect the supplied power adapter.
9 WPS Button
Press for 2 seconds to start the WPS process. The WPS LED will blink during
the process. The light will turn solid green when successfully connecting
to a device.
10 Internet Port Connect a broadband modem to this port using an Ethernet cable.
11 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles.
1 432
5
6
7 8 9 10 11
To Next Page
Loading...
