D-Link DIR-819 - System Requirements

6
5
Plug the power adapter into your router and connect to an available
power outlet or surge protector. If the Power LED does not light up, press
the Power button on the back of the router.
6
After the router has powered up, verify that the Power and Internet LEDs are
both lit. If so, you can now connect devices to your router using the Wi-Fi
Name (SSID) and Password found on the D-Link Wi-Fi Conguration Card
or sticker on your router.
If you want to change your Wi-Fi Network Name or Password, continue on to
the Conguration section.
Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari)
and enter http://dlinkrouter.local./ or the IP address of the router
(http://192.168.0.1).
1
INTERNET
POWER
POWER PORT
WPS
4321
RESET
Computer
Modem
DIR-819
Conguration (Optional)
1 2 3 4 INTERNET 12V --1.5A POWER WPS
Wireless
Computer*