92D-Link DIR-827 User Manual
Section 4 - Security
Wi-PnP Wireless Setup
Wi-PnP allows you to copy your wireless settings from your router to a USB ash drive and use to automatically congure the wireless settings on
your Windows® computers. Follow the steps below:
1. Plug in USB Flash Drive in USB port on the back of the router.
2. Press and hold the WPS button (located on the front of the router) for 5 seconds. The power LED will blink.
3. Wait 10 seconds and unplug the USB Flash Drive from the router.
4. Plug the USB Flash Drive in a Windows-Based computer.
5. The window below will automatically appear. Double-click Connect to a wireless network.
To Next Page
Loading...
