DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the router:
• create groups of ports for VLANs
• add name servers
• configure a DDNS service
• enable the NSG service
• configure autonegotiation or manually configure speed and duplex mode for each Ethernet
port of the router
• configure notifications on the reason of the Internet connection failure
• define static routes
• configure TR-069 client
• create rules for remote access to the web-based interface
• enable the UPnP IGD protocol
• enable the built-in UDPXY application for the router
• allow the router to use IGMP
• allow the router to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
through functions for the router
• configure VPN tunnels based on IPsec protocol.
Page 123 of 191
To Next Page
Loading...
