DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
1
On the Advanced / Redirect page, you can enable notifications on the reason of the Internet
connection failure. Notifications will be displayed in the browser window when a user is attempting
to open a web site on the Internet.
Figure 107. The Advanced / Redirect page.
To configure notifications, in the Common Settings section, move the Enable redirect switch
to the right. Then, in the Reasons for Redirect section, move the needed switches to the right.
Parameter Description
Reasons for Redirect
Physical connection
error
Notifications in case of physical connection problems (the ISP's
cable is not connected, an additional device needed to access the
Internet is not connected).
The device is not
configured
Notifications in case when the device works with default settings.
No connection
Notifications in case of problems of the default WAN connection
(authorization error, the IPS's server does not respond, etc.).
Autoconfiguration
Notifications in case when the ISP's auto configuration server is
configuring the device remotely.
When you have configured the parameters, click the APPLY button.
To disable notifications, move the Enable redirect switch to the left and click the APPLY button.
Page 135 of 191
To Next Page
Loading...
